The inspection precautions before running the trailer power station are important for ensuring the safe and stable operation of the generator. The following are the precautions compiled based on the characteristics of Huaquan generator sets and the inspection requirements before the operation of conventional generator sets:
1、 Trailer Power Station Oil and Coolant Inspection
Trailer power station oil inspection:
Pull out the oil dipstick, wipe it with a clean cotton cloth, then screw it back in, and then pull it out to check the oil level.
Ensure that the oil level is at the appropriate position of the oil dipstick indicator line. If there is a lack of oil, it should be added to the specified "static full" mark.
Pay attention to the quality and viscosity of the engine oil, regularly replace the engine oil, and avoid using deteriorated or non compliant engine oil.
Coolant inspection:
Check whether the cooling water or antifreeze in the diesel engine water tank is sufficient.
If there is a lack of coolant, it should be filled to the specified water level to ensure the normal operation of the cooling system.
2、 Trailer Power Station Fuel System Inspection
Trailer power station fuel level check: Ensure that there is sufficient fuel in the tank to avoid fuel interruption causing the generator to stop with load.
Trailer Power Station Fuel Filter Inspection: Check if the fuel filter is clogged or damaged, and replace or clean it if necessary.
Fuel pipeline inspection: Check for any oil leakage in the fuel pipeline to ensure normal fuel supply.
3、 Trailer Power Station Electrical System Inspection
Battery inspection:
Check the charge status of the battery to ensure that it is charged to the appropriate level.
Clean the battery terminals to ensure that the battery cables are securely connected and can store electricity normally.
Electrical circuit inspection:
Check the electrical circuit for potential leakage hazards such as skin damage.
Check whether the grounding wire electrical circuit is loose and whether the connection between the unit and the foundation is firm.
4、 Inspection of mechanical components and accessories for trailer power station
Fastener inspection: Check whether the connecting bolts of each rotating component are loose and tighten them in a timely manner.
Filter inspection: In addition to the fuel filter, it is also necessary to check the condition of the air filter and oil filter to ensure that they are clean and functioning properly.
Inspection of intake and exhaust system: Check the sealing of the intake and exhaust pipes and cylinder gaskets to prevent air leakage.
5、 Other precautions for trailer power station
Generator placement: Ensure that the generator is placed on a level surface to avoid tilting or shaking.
Output air switch: Before starting the generator, ensure that the output air switch of the generator is in the off state.
Start and Idle: Ordinary generator sets need to idle for a period of time (such as 3-5 minutes) after starting, observe whether the oil pressure is normal, and whether there are any abnormal phenomena such as oil leakage or water leakage.
Monitoring and Recording: Establish a comprehensive system for monitoring and recording the operation of the generator in real-time.
The inspection precautions for the trailer power station before operation involve oil and coolant, fuel system, electrical system, mechanical components and accessories, as well as multiple other aspects. Only by ensuring that these aspects are thoroughly inspected and prepared can the normal operation and extended use time of the generator set be guaranteed.
More trailer power station information:http://www.wfhqfdjz.com/
