Proper storage procedures are essential for maintaining Huaquan generators during periods of inactivity. Whether preparing for seasonal storage or long-term preservation, following correct methods prevents deterioration and ensures readiness when needed.
1. Cleaning and Preparation for Huaquan Generators
Thoroughly clean your Huaquan generator before storage. Remove dirt, grease, and debris from all surfaces, paying special attention to cooling fins and air intake areas. This prevents corrosion and maintains proper ventilation characteristics.
2. Fuel System Treatment for Huaquan Generators
For short-term storage (1-3 months):
Add fuel stabilizer to the tank
Run the Huaquan generator for 10 minutes to circulate treated fuel For long-term storage:
Drain the fuel system completely
Run the engine until it stalls to remove residual fuel
3. Oil Change Procedure
Change the engine oil in your Huaquan generator before extended storage. Used oil contains contaminants that can cause internal corrosion during idle periods. Fresh oil provides better protection for engine components.
4. Battery Maintenance
Disconnect and remove the battery from your Huaquan generator. Store in a cool, dry place and maintain charge with a trickle charger. Avoid direct concrete floor contact which can accelerate discharge.
5. Moisture Protection
Store your Huaquan generator in a dry, climate-controlled environment when possible. Use moisture-absorbing products in the storage area and cover the unit with a breathable fabric cover - never plastic which traps condensation.
6. Proper Positioning for Huaquan Generators
Place your Huaquan generator on level ground with the engine in its normal operating position. This prevents oil seepage and maintains proper sealing of gaskets and seals.
7. Periodic Maintenance for Huaquan Generators
Even during storage, perform monthly maintenance:
Rotate the engine manually several revolutions
Check for signs of moisture or pests
Verify the storage environment remains stable
8. Reactivation Protocol
When preparing to use your Huaquan generator after storage:
Inspect all components thoroughly
Reinstall a fully charged battery
Refill fluids as needed
